Offshore Wind Jobs in Romania

Senior Electrical Engineer

Senior Electrical Engineer leading electrical design teams across new builds, upgrades, and redevelopment projects for power, industrial, institutional, and infrastructure facilities. Oversees design and construction phases, adapting plans to technical requirements, budgets, and project constraints. Key Responsibilities: Lead complex electrical engineering work and develop improved design processes and methods Perform power system studies and protection coordination up to 500kV Develop design basis documentation and generate relay configuration files Conduct design reviews and support quality assurance Assist in defining project scope and conceptual design Mentor and train less experienced engineers Support proposal and business development effort. Requirements: Bachelor’s degree in Electrical Engineering and at least 7 years of electrical system study experience (or Master’s plus 6 years) Ability to obtain Professional Engineer licensure Proficiency interpreting electrical drawings (single line, three line, schematics, functional diagrams) Preferred Experience: Protective relay settings for transmission or distribution systems Power system modelling software (ASPEN, CAPE, CYME, ETAP, SKM) Use of SEL AcSELerator and GE Enervista for relay files Short circuit analysis, CT selection, protection element coordination, relay loadability calculations Grounding, arc flash, and additional system studies Support to construction and commissioning activities for substations

Senior Environmental Engineer

Senior Environmental Engineer responsible for leading and supporting environmental and civil engineering projects, with opportunities to take on increasing responsibility and technical leadership. Work may include stormwater management, hydraulic analysis, solid waste, remediation, containment liner systems, water quality and treatment systems, and site development. Key Responsibilities: Develop technical solutions and perform engineering calculations Lead or support design of environmental systems and facilities Prepare and review reports, drawings, specifications, work plans, construction documentation, and cost estimates Direct and mentor junior engineers and technical staff Support project management activities including scope, budget, schedule, quality, and safety Provide oversight during construction and prepare construction quality assurance documentation Deliver presentations and support staff development Travel as required (approximately 10 percent) Requirements: Bachelor’s degree in an engineering discipline from an accredited university Professional Engineer (PE) license Minimum 7 years environmental or civil engineering experience Experience with AutoCAD, Civil 3D, GIS, and related design tools Experience working on construction sites and understanding of construction methods preferred Strong communication, problem-solving, organization, and collaboration skills

Project Manager - Substation

Project Manager responsible for leading multi-discipline engineering and construction projects from initiation through completion, ensuring delivery on time, within budget, and to required safety and quality standards. Oversees day-to-day project execution across safety, quality, schedule, cost, risk, procurement, contracts, project controls, documentation, and field activities. Key Responsibilities: Lead and manage project teams across engineering, procurement, construction, and project controls Establish project structure, allocate resources, and coordinate multi-discipline activities Develop and maintain project schedules, budgets, scopes, and risk management plans Prepare and administer RFPs, subcontracts, change orders, and contract documentation Manage project reporting, cost forecasting, scheduling, and progress tracking Ensure compliance with safety programs, QA/QC procedures, and relevant regulations Guide and mentor less experienced project staff Oversee project closeout, documentation turnover, and lessons learned Participate in industry conferences and committees as needed Qualifications: Bachelor's degree in engineering, construction management, or related discipline Minimum 7 years of relevant project management experience Experience on construction or program management projects preferred across sectors such as energy, commercial, industrial, utilities, or infrastructure Strong communication, analytical, and problem-solving skills Ability to coordinate multi-discipline teams in fast-paced environments and manage changing priorities Proficiency in Microsoft Office and project management, scheduling, cost control, and document control software

Transmission Engineer

Our Transmission & Distribution division is looking for a staff Transmission Line Engineer to join our growing business in the Akron, Columbus, and St. Louis offices. Our Transmission Line Engineers are expected to maintain a high attention to detail, possess working knowledge of Transmission Line design, demonstrate ownership of their work, drive for continual improvement, and collaborate effectively with their team and clients in order to make our clients successful. Key Responsibilities: Design transmission lines using PLS-CADD Prepare plan and profile drawings, loading trees, and foundation details Develop design criteria, specifications, and supporting documentation Provide technical support during construction Mentor junior staff and support strong team collaboration Occasional travel to project sites Requirements: B.S. in Engineering from an ABET-accredited program (or Engineering Technology with FE passed) Minimum 3 years transmission line design experience Strong communication, analytical and problem-solving skills Ability to manage schedule and budget responsibilities Experience in a consulting or utility environment preferred HVDC experience beneficial

Senior Authorised Person

Fulfil the following roles in accordance with the Clients Operational Safety Rules on systems up to 400kV: Senior Authorised Person (L3) Safety Coordinator System Controller Participate in all provided training and authorisation processes to achieve and maintain required authorisations for the Vanguard Offshore Wind Farm. Support the Lead SAP with the implementation of the safety from the system process by embedding company procedures and operational instructions for both onshore and offshore activities. Train and direct other SAPs and team members on the application of the rules. Take responsibility in ensuring Safety From The System is achieved and all required documentation is prepared and issued prior to all work commencing. Assess each job on a task by task basis. Identifying all necessary precautions. Supervise Contractors and ensure use of correct PPE, equipment and working practices. Prepare/review Method Statements and Risk Assessments for work on site. Support the Location/Responsible Manager in the development and production of all required Local Management Instructions. Fully support the Location/Responsible Manager and coordinate the necessary documentation control procedures associated with Clients Operational Safety Rules. Ensuring known status at all times. If necessary, Participate in onshore shift rotation and 24/7 callout rota during transitional phase of commissioning. Carry out Permit reviews and share lessons learnt between other sites. Ensure that the technical information provided by the Commissioning Team is sufficient to allow safe energisation and challenge where needed. DELIVERABLES Arrange necessary Safety Documents for work on the 400kV, HVDC/OFTO and WFO plant & apparatus, working alongside National Grid Senior Authorised Persons and coordinate cross boundary activities via the Record of Inter System Safety Precaution (RISSP) process. Coordinate Senior Authorised Person tasks/activities on and offshore. Support the Location/Responsible Manager with the preparation of all site specific training, assessments and audits required for personnel to be authorised for works on the Vanguard Offshore Wind Farm. Support the Commissioning Manager with the specification and procurement of the approved tools and equipment that will be required to implement the Clients Operational Safety Rules at the Offshore Wind Farm. CERTIFICATIONS Senior Authorised Person (SAP) status within a Distribution Network Operator, National Grid or Offshore Wind Farm to 400kV. Relevant technical education, for example, time served apprenticeship or similar with a HNC qualification (or equivalent) in an electrical engineering discipline. IOSH/NEBOSH Certification. Valid National Grid Persons (Substations) certification. OTHER REQUIREMENTS Significant and demonstrable experience working in a similar capacity. Proven track record in a Client role Self-starting with planning/coordination and problem solving abilities. Good standard of IT literacy (i.e. MS Office). Ability to produce project specific documentation as required to support the project and implementation of Company procedures. Provide all standard Personnel Protective Equipment (PPE) as required to perform your role.

Onshore Substation Commissioning Engineer - M&E - Lead

The role will oversee and coordinate the commissioning of the Mechanical and Electrical systems involved within the HVDC system for both onshore and offshore works. The role will oversee the technical requirements and installation on the ONS site, and will will interface with the M&E commissioning team at the overseas and the offshore commissioning team, this is to ensure that there is an aligned commissioning process throughout the HVDC system and that progress is tracked and managed. There may be limited travel overseas and offshore to engage with the commissioning team. The expectation of the role is that you are based onsite. The role will work closely with the construction teams (Contractor and Employer) and the commissioning HV Safety teams to provide a “readiness to energise” review for the systems. You will ensure that tests have been completed and issues are raised and managed. So a strong technical background is important to understand the potential issues with the equipment installed. The role will need to keep records of tests and respond to technical questions from the HV Safety Team. They will also ensure that the commissioning files for the systems are updated. DELIVERABLES Oversee Contractor Commissioning activities at ONS sites Remote technical support to the team overseas and offshore where the commissioning activities taking place. Oversee and support Commissioning activities for the OSS for both the Yard works and offshore works Provide the overview of all commissioning activities for the HVDC system. Work with the Clients (Commissioning, Engineering and Quality) and Contractor Technical teams to respond to questions Attend SATs and manage ITPs from a technical perspective Provide training to new starters such as the O&M team Coordinate and complete the commissioning file Respond to technical questions relating to the readiness to commission Client witness and sign off of commissioning works. Investigate and report on Faults during the commissioning phase Represent Commissioning team in onshore coordination and SIMOP meetings. Support Commissioning Package Manager to ensure required onshore Commissioning procedures are available. Responsible for ensuring accurate ‘As Built’ Drawings and Commissioning Records are kept by the Subcontractor. CERTIFICATIONS Experienced in the commissioning and operation of Mechanical and Electrical equipment associated with HVDC Converter stations., Powerstation, and industrial plant. Such as: Electrical system testing and commissioning Pump and Motor Commissioning and operation Cooling systems commissioning and operation Instrumentation and control calibrations and commissioning Information Security systems Building services commissioning – HVAC etc. IOSH/NEBOSH Certification OTHER REQUIREMENTS Experience with working with Tier 1 contractors Familiarity with HV Safety Rules and their requirements GWO training to attend offshore visits for OSS – not initially required. Proven track record in a Client role. Understanding of Safe Systems of Work. Self-starting with planning/coordination and problem solving abilities. Fluent written and verbal English with good communication skills

Onshore Substation HV Commissioning Engineer - Lead

The role will oversee and coordinate the commissioning of the HVDC system (inc 400kV) for both onshore and offshore works. The role will oversee the technical requirements and installation of the HVDC systems at the onshore substation, and will interface with the HV commissioning team and the offshore commissioning team, to ensure that there is an aligned process and progress of the HVDC commissioning. There may be limited travel overseas and offshore to engage with the commissioning team. The role will also include overseeing the Stage 2 commissioning of the 400kV bays at the onshore substation. The role will work closely with the construction teams (Contractor and Employer) and the commissioning HV Safety teams to provide a “readiness to energise” review for the systems. You will ensure that tests have been completed and issues are raised and managed. So a strong technical background is important to understand the potential issues with the equipment installed. The role will need to keep records of tests and respond to technical questions from the HV Safety Team. You will also ensure that the commissioning files for the systems are updated. DELIVERABLES Oversee Contractor Commissioning activities at ONS sites Remote technical support to the team overseas and offshore where the commissioning activities taking place. Oversee and support Commissioning activities for the OSS for both the Yard works and offshore works Provide the overview of all commissioning activities for the HVDC system. Work with the Client (Commissioning, Engineering and Quality) and Contractor Technical teams to respond to questions Attend SATs and manage ITPs from a technical perspective Provide training to new starters such as the O&M team Coordinate and complete the commissioning file Respond to technical questions relating to the readiness to commissioning Client witness and sign off of commissioning works. Investigate and report on Faults during the commissioning phase Represent Commissioning team in onshore coordination and SIMOP meetings. Support Commissioning Package Manager to ensure required onshore Commissioning procedures are available. Responsible for ensuring accurate ‘As Built’ Drawings and Commissioning Records are kept by the Subcontractor.

Offshore, Germany - Germany

Commissioning Engineer - HV Switching

Work alongside the Electrical Systems Package site representatives and Client Commissioning Engineers to assist in delivering the Commissioning activities as Clients Engineer, driving the work scope forward on site to meet the project programme. Client witness and sign off for Stage 1 and Stage 2 Commissioning for Substations or Wind Turbines Provide technical support for Project Senior Authorised Persons and M&E Engineers. Provide assistance for the Client Commissioning Manager (Lead) and SCADA Commissioning Manager Based principally in the Jack-Up Vessel or Commissioning Vessel following installation of the assets offshore. Alternatively, limited work period in the onshore construction yard before Load-Out. Initial investigation and reporting of incidents Perform switching operations (66 kV – 155 kV) at offshore substations, export cables, and wind turbines in line with client HV Safety Rules. Manage the Permit to Work (PTW) system – Permit request and approval,. Carry out fault diagnosis and troubleshooting on offshore HV equipment. Deliverables: Weekly reporting and record keeping on Progress and Issues to the Client Commissioning Manager (Lead) Liaise with Engineering and Quality Departments to ensure Outstanding Engineering/Quality Issues are resolved. Interface with the IAC team, OSS team and WTG team. Elaboration of Switching Plan and HV Switching Schedules. Responsible for ensuring accurate ‘As Built’ Drawings and Commissioning Records produced by the Contractors. Certifications: Relevant technical education (e.g. Electrical Engineering Degree/HNC ) desirable or equivalent. Certified according to VDE 0105-100 as Switching Operator (Schaltberechtigter) or eligibility to be certified with the corresponding training. GWO basic safety training GWO Enhanced First Aid Training (Ersthelfer Offshore DGUV) Helicopter Underwater Escape Training (HUET) Offshore medical fitness Other requirements: Proven Electrical Commissioning Engineer in a MV/HV asset (Client or Contractor role) Knowledge of testing Alarms/Controls/Indications from a range of MV/HV Equipment to SCADA Systems Knowledge of commissioning of LV/MV/HV Switchgear and associated components. Knowledge of Siemens/GE protection relays including IEC61850/Goose communications is desirable. Experience of BMS Systems is desirable Understanding of HV Safety Rules. Self-starting with planning/coordination and problem solving abilities. Fluent written and verbal English with good communication skills

Deputy Lead Senior Authorised Person / System Controller