Commissioning is the last gate before energisation, and it is the role where a wrong hire shows up as a slipped date rather than a performance review. Day rates run £500 to £900 and network authorisation decides who can even get on site. LSP Renewables matches engineers to your relay platform.

Key Takeaways

  • Senior commissioning roles frequently require an AP or SAP appointment alongside testing competence. Jobsite advertised a combined Senior Authorised Person and HV Commissioning Engineer role in the North East at £70,000 to £90,000 plus bonus in October 2026.
  • Network-specific authorisation controls access to the work. A Kincardine contract was advertised with SPEN authorisation marked essential at £84 per hour outside IR35 on a 50-hour week for a two-month window from 1 September to 31 October 2026.
  • Contract rates run £500 to £550 per day outside IR35 in Wrexham, £600 to £700 for 132kV work, and £800 to £900 all-in at Peterhead on 11kV to 400kV, with a Central Belt Scotland role at £900 per day outside IR35 over twelve months.
  • Omicron is the standard UK test platform, with the CMC 356 hiring at £849 to £872 per week and the CMC 500 at £900, and the next UK Omicron CMC course at Stafford is not scheduled until 20 April 2027.
  • Relay vendor spread is the main screening problem. One Scottish 132kV to 400kV advert asked for any one of Siemens DIGSI, ABB or Hitachi PCM600, GE MiCOM S1 Studio or SEL AcSELerator, on top of Omicron Test Universe.

Why Commissioning Engineers Often Need an SAP Appointment Too

Commissioning sits inside somebody else’s safety document, until the engineer holds the appointment themselves. Under National Grid’s NSI 9, testing within a single control boundary is coordinated by the Senior Authorised Person, while testing across HV control boundaries is coordinated by the Control Person (Safety) under a Sanction for Work. Under NSI 33, new plant stays under a Local Control Person, who is an SAP, until it is declared part of the National Grid system.

That is why so many senior commissioning adverts carry an authorisation requirement. Astute People’s HV commissioning briefs ask for Authorised Person or Senior Authorised Person experience, and the North East role combining SAP with commissioning paid £70,000 to £90,000 plus bonus. An engineer who can test but cannot switch needs an SAP alongside them on every outage, which doubles the headcount on a short energisation window.

Authorisation is also network-specific rather than portable, so a commissioning engineer authorised by one operator cannot simply mobilise onto another’s substation. The Kincardine contract made SPEN authorisation essential rather than desirable, and the two-month window gave no time to authorise somebody new. Where those control boundaries sit between networks is covered in the definition and scope of transmission and distribution.

The Platform and Test Equipment Requirements

Five technical areas decide whether an engineer can work your substation. Secondary injection on Siemens SIPROTEC and Reyrolle 7SR relays comes first, since those are the most common UK distribution protection platforms, and Astute’s Wrexham contract specified SIPROTEC feeder relays and 7SR2302 busbar protection directly. Omicron Test Universe and CMC operation is second, and it appears on everything from 132kV upgrades to the Peterhead HV and EHV programme.

Relay configuration across vendors is third, and it is the item most likely to break a placement. A Scottish 132kV, 275kV and 400kV upgrade advert required one of Siemens DIGSI, ABB or Hitachi PCM600, GE MiCOM S1 Studio or SEL AcSELerator, while GE Vernova’s Rugby role names GE MiCOM, Siemens SIPROTEC and ABB Rex. Transmission sites mix vendors, so an engineer strong on one platform can arrive and stall on the next bay.

IEC 61850 substation automation with factory and site acceptance testing is fourth, and it is being specified more often as digital substations enter RIIO-T3 builds. G99 compliance testing paired with line differential testing is fifth, and it is what distribution-connected generation and battery energisation depends on.

Formal certification is thin. No commissioning-specific City and Guilds qualification exists, so engineers add City and Guilds Assured AP or SAP courses through providers such as PPL Training at £1,565 plus VAT. Omicron runs a one-day automated overcurrent protection testing course at its Stafford training centre, but UK pricing is not published and the next scheduled date is 20 April 2027, so vendor training cannot be used to close a gap quickly.

What HV Commissioning Engineers Cost in 2027

Permanent pay runs from a Jobsite commissioning engineer average of £37,499 at entry level, through a £40,000 to £65,000 band at mid level, to £84,160 plus a 3% bonus at UK Power Networks in Crawley. GE Vernova advertised a Lead Power System Engineer in protection and control at £75,000 to £95,000 in Rugby, which is the top of the permanent market.

Contract is where the money sits and where the regional spread is sharpest. Scotland pays most, at £800 to £900 per day all-in on the Peterhead programme and £900 per day outside IR35 on a twelve-month Central Belt role. Wales and the North West sit at £500 to £550 per day outside IR35, 132kV work runs £600 to £700, and Morson’s inside-IR35 band for project and commissioning engineers is £380 to £500. Which of those an engineer actually keeps depends on status, and the IR35 status determination model in renewable energy contracting sets out how that is determined.

Demand through 2027 is energisation-led rather than construction-led, which matters because commissioning demand peaks later than civils and installation. Gate 2 Phase 1 brings 132GW to connect before 2030 and every connection needs protection commissioning, with distribution-connected generators also requiring G99 witness testing. ASTI covers 26 projects worth roughly £20bn targeting 2030, National Grid’s RIIO-T3 business plan sought up to £35bn, Eastern Green Link 2 carries a £3.4bn funding package, and two 1.4GW HVDC projects at Necton in Norfolk energise in 2027. Against that, IEEE PES and Kearney reported in August 2025 that roughly 15% of power engineers plan to retire within the decade. How clients phase that work appears in how clients sequence hiring on major substation programmes.

How We Recruit HV Commissioning Engineers

Step 1. We take the protection schedule before the job spec, because the relay platforms on site determine the candidate pool far more than the job title does.

Step 2. We build a vendor matrix for every candidate, recording Siemens DIGSI, ABB or Hitachi PCM600, GE MiCOM S1 Studio, SEL AcSELerator and Omicron Test Universe competence separately rather than as one line.

Step 3. We keep a live register of commissioning engineers by network authorisation with renewal dates, so a two-month window requiring SPEN or National Grid authorisation can be filled from people already authorised.

Step 4. We confirm whether the role needs an AP or SAP appointment alongside testing competence, since an engineer who cannot switch requires an SAP on every outage and that changes the cost of the whole package.

Step 5. We supply a rate card covering both inside and outside IR35, because the 2026 spread ran from £380 per day inside to £900 outside and clients comparing a single number reach the wrong conclusion.

Step 6. We lock engineers into nine to twelve month rolling contracts ahead of the 2027 energisation peaks, which protects continuity through witness testing rather than losing people mid-programme. Our transmission and grid recruitment desk runs this across transmission owners, distribution operators, HVDC programmes and renewables developers.

Frequently Asked Questions

Does an HV commissioning engineer need to be an SAP?

AP or SAP status is not mandatory for every role, but it widens what the engineer can cover. A North East vacancy combined SAP with HV commissioning at £70,000 to £90,000 plus bonus, and Astute People’s commissioning adverts ask for AP or SAP experience, because commissioning teams often need to switch during energisation.

What day rate does a substation commissioning engineer earn?

Contract HV commissioning engineers were advertised at £500 to £900 per day in 2026. Astute offered £500 to £550 outside IR35 in Wrexham, Jobsite listed 132kV commissioning at £600 to £700, and a Central Belt Scotland role paid £900 per day outside IR35 over twelve months.

What test equipment should a commissioning engineer know?

Omicron CMC secondary injection sets are the most frequently named UK protection test equipment. UK hire firms list the CMC 356 at £849 to £872 per week and the CMC 500 at £900 per week, and a Scottish 132kV to 400kV commissioning advert specified Omicron Test Universe by name.

Which protection relays do UK commissioning engineers test?

Siemens SIPROTEC and Reyrolle 7SR, GE MiCOM, ABB or Hitachi and SEL relays dominate UK adverts. One Scottish transmission advert asked for any one of Siemens DIGSI, ABB or Hitachi PCM600, GE MiCOM S1 Studio or SEL AcSELerator, while a Wrexham contract specified SIPROTEC feeder and 7SR2302 busbar protection.

Who coordinates testing on a National Grid substation?

Testing within one control boundary is coordinated by the Senior Authorised Person, while testing across HV control boundaries is coordinated by the Control Person (Safety) under a Sanction for Work, under National Safety Instruction NSI 9. Commissioning engineers therefore work inside the SAP’s safety document.

Get commissioning engineers matched to your relay platform and authorisation

We’ll screen the authorised commissioning pool against your protection schedule and network authorisation, and tell you whether the role needs an SAP appointment attached to it.