Hire a Protection and Control Engineer for HV Substations
A protection and control engineer designs, sets and tests the relay schemes that detect faults and trip circuit breakers on HV substations. LSP Renewables’ transmission desk has placed T&D leadership with National Grid ET, SSEN Transmission and SSE, and recruits the P&C engineers that energisation dates depend on.
Key Takeaways
- A protection and control (P&C) engineer owns the secondary systems of a substation, covering protection relays, control and interlocking, metering and SCADA integration.
- Most P&C vacancies fall into three profiles, covering secondary design, protection settings and P&C commissioning.
- The network operator must approve protection settings and witness the scheme tests before a substation can energise, so a missing P&C engineer can hold the whole programme.
- Modern substations increasingly use IEC 61850 digital communication, so many clients now want P&C engineers with substation automation experience as well as relay testing.
- P&C engineers are among the hardest HV roles to fill, because few engineers combine design, settings and commissioning experience at 132 kV, 275 kV or 400 kV.
What a Protection and Control Engineer Does
A protection and control engineer makes sure an HV substation detects faults and isolates them in milliseconds, without tripping healthy circuits. The role designs the protection and control schemes, calculates relay settings, builds the secondary wiring design, and proves every scheme works before the substation goes live.
Protection is the safety system of the grid. When a cable fails or a transformer develops a fault, relays measure the change in current or voltage and trip the right circuit breakers. Settings that are too sensitive trip healthy circuits, and settings that are too slow let a fault damage plant, so the engineer’s calculations carry real consequences.
What types of protection and control engineer are there?
There are three main types of P&C engineer. Secondary design engineers produce the protection and control schematics and wiring designs, protection settings engineers calculate and coordinate relay settings, and P&C commissioning engineers test and prove the installed schemes. Senior candidates often cover two of the three, which makes them especially hard to find.
Each profile suits a different employer. Transmission and distribution network operators hire settings engineers, HV contractors and consultancies hire design engineers, and commissioning contractors hire test engineers for site work.
What protection schemes does a P&C engineer work on?
A P&C engineer works on line, transformer, busbar and feeder protection, using schemes such as distance, differential and overcurrent protection. The engineer also covers control and interlocking, so breakers and disconnectors operate in a safe sequence, and integrates the substation with the network operator’s SCADA and control centre.
Why Protection and Control Engineers Are Hard to Hire in 2027
Protection and control engineers are hard to hire because the work needs years of HV experience and the same engineers are wanted by transmission owners, DNOs, HV contractors and renewable developers at once. Hiring protection and control engineers for 275 kV projects takes longer than most clients plan for.
Demand is rising on both sides of the grid. The RIIO-T3 grid investment pipeline adds transmission substation work, while every new solar farm, battery site and wind farm needs its own protection scheme approved before it can export.
What skills should a protection and control engineer have?
A protection and control engineer needs hands-on experience with numerical protection relays, a working knowledge of the network operator’s protection policies, and the ability to calculate and coordinate settings. Commissioning roles need secondary injection testing experience, and senior roles increasingly need IEC 61850 and substation automation skills.
Voltage and network experience matter as much as technical skill. An engineer who understands how transmission and distribution responsibilities divide knows which operator’s standards apply and who will witness the final tests.
When should you hire a P&C engineer on a substation programme?
You should hire a P&C engineer early in the design phase, before equipment is ordered and long before commissioning. Protection settings need network operator approval, secondary design shapes the panel order, and commissioning engineers need booking against witness test dates, so late hiring pushes the energisation date back.
Clients that plan hiring for major substation programmes brief P&C roles first, because they’re the longest searches on the programme.
How We Recruit Protection and Control Engineers
LSP recruits protection and control engineers in four stages, matching each engineer’s voltage, scheme and network record to your substation programme.
Step 1. We brief on voltage level, network operator and scope, separating secondary design, settings and commissioning roles because each needs a different record.
Step 2. We search our grid network for P&C engineers from transmission owners, DNOs, HV contractors and commissioning specialists.
Step 3. We test relay, settings, injection testing and IEC 61850 claims before any client sees a CV, using the same technical questions hiring managers ask.
Step 4. We manage the offer and mobilisation, and place permanent or contract P&C engineers through our transmission recruitment desk.
Senior P&C engineers often move into lead engineer and package manager roles, and that step mirrors moving from senior project manager to project director on HV works, with accountability widening from one scheme to a programme.
Frequently Asked Questions
What does a protection and control engineer do?
A protection and control engineer designs, sets and tests the systems that detect faults on an HV network and trip circuit breakers to isolate them. The role covers protection relays, control and interlocking, metering and SCADA integration, and proves every scheme works before the substation goes live.
What qualifications does a protection and control engineer need?
Most protection and control engineers hold an electrical engineering degree or HNC/HND, and many hold or pursue Incorporated or Chartered Engineer status with the IET. Employers look for numerical relay experience, settings calculation, secondary injection testing and knowledge of the network operator’s protection policies at the relevant voltage.
What is the difference between primary and secondary substation engineering?
Primary engineering covers the HV equipment that carries power, such as transformers, switchgear, busbars and cables. Secondary engineering covers the systems that protect, control and monitor that equipment, such as relays, interlocking, metering and SCADA. Protection and control engineers work on the secondary side of the substation.
Should I hire a permanent or contract P&C engineer?
Hire a permanent P&C engineer if you run an ongoing substation or connection programme and need settings and design capacity long term. Hire contract P&C commissioning engineers for site peaks and witness test windows, and settle IR35 status upfront. Many clients combine a permanent settings lead with contract commissioning support.
Need a protection and control engineer for your next substation?
Send us your vacancy and our grid desk will brief, search and shortlist P&C engineers with the voltage and network record your programme needs.