Control and Instrumentation Engineer Recruitment

The control and instrumentation engineer decides whether your solar, storage or grid asset runs safely and connects to the grid at all, and grid-code-literate C&I engineers are among the hardest hires in renewables to secure. LSP Renewables sources scarce SCADA, PLC and instrumentation talent screened on the experience that protects your connection date.

Key Takeaways

  • A control and instrumentation engineer in UK renewables earns roughly £47,000 to £58,000 base on average, rising to £60,000 to £70,000 for senior SCADA and PLC specialists per 2026 job postings.
  • The role runs the PLC, SCADA, HMI and power plant controller stack that connects a solar or battery asset to the grid, so the wrong hire risks the commissioning date.
  • Grid-code compliance is the skill that separates a renewables C&I engineer from a general process engineer, and it is the hardest to find.
  • Over 90 percent of European transmission system operators report skills shortages delaying grid projects, per EnableGreen, so C&I search is a scarcity problem, not a volume one.

What Does a Control and Instrumentation Engineer Do?

A control and instrumentation engineer designs, configures and commissions the control systems that run a renewable energy asset, from PLC logic and SCADA to the power plant controller and instrumentation. On a solar or battery site, that engineer is the reason the plant monitors itself, responds to the grid, and passes its acceptance tests.

The work spans the full project lifecycle. In design it means control narratives, functional requirement documents and SCADA architecture; in delivery it means PLC programming in function block, structured text and ladder logic, HMI development, and factory acceptance testing; on site it means commissioning and integration with protection schemes. That breadth overlaps closely with the senior electrical engineers for solar PV systems clients hire alongside them.

What skills does a renewables C&I engineer need?

A renewables C&I engineer needs PLC programming, SCADA and HMI configuration, power plant controller knowledge, and grid-code compliance, layered on core instrumentation and calibration. The technical stack is broad, and the renewables-specific knowledge turns a competent controls engineer into a deliverable one.

Grid-code compliance is the decisive skill. Any process engineer can program a PLC, but a renewables C&I engineer must understand grid connection requirements, power quality standards and power systems protection, which distinguishes a successful candidate. Familiarity with protocols such as Modbus, DNP3 and OPC, SCADA platforms like Ignition, and PCS and BMS integration completes the profile, which is why clients often pair this hire with the solar design engineers for grid-connected projects on the same programme.

Which job titles describe the same engineer?

The same engineer appears under several titles, so a keyword-only search misses strong candidates. A renewables C&I engineer might be advertised as an EC&I engineer, a controls engineer, a SCADA engineer, an instrumentation engineer, a PLC or automation engineer, or an electrical controls engineer.

A candidate whose CV says SCADA engineer on a PV and BESS site may be a closer match than one whose CV says C&I engineer in a process plant. Screening on demonstrated skills rather than job title is what surfaces the real shortlist.

What Does a C&I Engineer Earn and Why Are They Scarce?

A control and instrumentation engineer in UK renewables earns an average of roughly £47,000 to £51,000 base, within a range of £38,000 to £58,000, and up to around £79,000 at the top per Glassdoor 2026 data. Senior SCADA and PLC specialists on solar and battery projects command £60,000 to £70,000.

Pay is pulled up by competition from oil and gas, where Aberdeen instrumentation roles reach £90,000 to £104,000 and draw transferable talent away from renewables. Airswift's GETI 2026 found 51 percent of energy professionals received a pay rise in the past year, so the benchmark keeps moving, which is why pricing against the BESS controls engineer salary benchmarks matters before you advertise.

The scarcity is structural, not a shortage of adverts. Over 90 percent of European transmission system operators report skills shortages delaying grid projects, and specialist energy roles now take 6 to 9 months to fill through internal channels. Much of the available talent sits in oil and gas, process or automotive control, so spotting genuine renewables readiness takes the same discipline as reading red flags in grid connection engineer CVs.

How We Hire a Control and Instrumentation Engineer

LSP Renewables runs a C&I search built for scarcity, targeting the passive pool and screening on grid-code evidence rather than job title. The five stages below sit behind every C&I engineer we place.

  1. We define the control stack, agreeing which PLC, SCADA, HMI and power plant controller experience the role needs, because a PV SCADA specialist and a BESS controls engineer are not the same hire.
  2. We search across titles, sourcing EC&I, controls, SCADA and instrumentation engineers together so a label-limited search does not hide strong candidates.
  3. We screen on grid-code evidence, prioritising candidates who can show grid connection, power quality and protection experience, not just PLC programming.
  4. We tap transferable pools, approaching oil and gas, process and automotive engineers whose integration skills transfer, then testing for renewables readiness.
  5. We benchmark and move fast, pricing the role against live data and closing quickly to beat the counter-offers a scarce market produces. This work runs inside our specialist utility-scale solar recruitment practice and across every renewables sector we cover.

FAQ

What does a control and instrumentation engineer do?

A control and instrumentation engineer designs, configures and commissions the control systems that run an energy asset, including PLC logic, SCADA, HMI and instrumentation. On a renewables project, that engineer connects a solar or battery plant to the grid, runs its monitoring, and delivers it through factory and site acceptance testing.

How much does a C&I engineer earn in UK renewables?

A C&I engineer in UK renewables earns an average of roughly £47,000 to £51,000 base, within a range of £38,000 to £58,000, and up to around £79,000 at the top. Senior SCADA and PLC specialists on solar and battery projects command £60,000 to £70,000, with oil and gas paying higher still.

What qualifications does a renewables C&I engineer need?

A renewables C&I engineer typically holds a degree in electrical, control, instrumentation or computer engineering, plus hands-on PLC and SCADA experience. Employers value grid-code compliance, power systems protection knowledge, and commissioning experience, alongside protocol familiarity such as Modbus, DNP3 and OPC on platforms like Ignition.

Why is it so hard to hire a C&I engineer in 2026?

C&I engineers are hard to hire because renewables demand is rising while the grid-code-literate pool stays small, and oil and gas competes for the same people. Over 90 percent of European transmission operators report skills shortages, and specialist energy roles now take 6 to 9 months to fill through internal channels.

Should I hire a permanent or contract C&I engineer?

Permanent suits long-term operations and design roles, while contract suits delivery and commissioning peaks, which is why SCADA and controls roles frequently run on a contract basis. The right model depends on the project phase, so match a permanent hire to ongoing operation and a contractor to a defined build or commissioning window.

Secure a Grid-Code-Ready C&I Engineer Before Commissioning

LSP Renewables sources scarce control and instrumentation engineers across solar, storage and grid projects, screened on the grid-code experience that protects your connection date. Talk to our team about the C&I role you need to fill.